The Fluidmesh^® 2200 Endo is a dual-radio wireless product. It is designed to be embedded in custom-made, outdoor enclosures for special applications such as public-safety or industrial monitoring in classified areas. The Fluidmesh 2200 Endo uses the same hardware and software of the Fluidmesh 2200 Duo, but is encased in a much smaller form factor. It is designed and manufactured specifically for security, video-surveillance, and mission-critical condition monitoring applications. The Fluidmesh 2200 Endo series can transmit the video streams coming from the cameras directly attached to it and dynamically route data packets coming from other Fluidmesh units through the optimal network path.

Simultaneous transmission with two quadri-band radios

The Fluidmesh 2200 Endo features two quadri-band radios with SMA connectors and can operate at 2.4 GHz, 4.9 GHz, and 5.1-5.8 GHz and modulate up to 108 Mbps. The dual-radio configuration can double the available bandwidth, and create 100% full-duplex wireless links. Selecting the most appropriate band for each link only requires a software setting.

FluidMAX™

The Fluidmesh 2200 Endo supports the patent-pending FluidMAX™ technology and can be used to create Point-to-Point, Point-to-Multipoint, and Mesh architectures. In developing FluidMAX, Fluidmesh has embraced the WiMax Point-to-Multipoint architecture and enabled its wireless units to operate with a centralized, or a distributed Medium Access Control protocol, depending on the network layout.  

EasyMesh™ Platform

The Fluidmesh 2200 Endo includes the EasyMesh™ platform. This technology allows the user to set the same range of private IP addresses across the entire network. This automatic tunneling hides the Fluidmesh Layer 3 network from the connected devices allowing the user to set up the system in Layer 2, reducing configuration and deployment time.
The Fluidmesh 2200 Endo also includes the FMQuadro™ Web interface which allows the user to configure, monitor, and troubleshoot the wireless network in real time without the need for additional software. The FMQuadro Web-based user interface provides real time throughput analysis and is capable of automatically reporting network congestion scenarios through a fully interactive network monitoring system.

MPEG4, M-JPEG, and H.264 optimization and multicast support

Every Fluidmesh 2200 Endo automatically detects the type of video packets (eg. MPEG4 vs. M-JPEG vs. H.264, I-frame vs. P-frame) and the transport protocol (e.g., UDP vs. TCP) in use and optimizes the wireless transmission based on the packet type. Moreover, video packets are prioritized over other packets in order to minimize delays. Fluidmesh technology supports multicast transmission, greatly reducing the required bandwidth for every camera.